Trane Heat Pumps

How Many Tons is my Trane Air Conditioner?

You can easily identify the nominal size of your Trane Air Conditioner and Heat Pump through checking out the model number. This Trane Model Number is usually the data plate at the side of the condenser in outdoor unit. Then find the lable that provides the info about your Trane AC Tonnage.

What is AC Tonnage?

Heating and air conditioning capacities are sized in British thermal units (BTU) per hour. One BTU is equal to the heat generated by an one little candle. It’s the volume of heat required to bring up the temperature of one pound of water by one degree.

The word tonnage is used to describe the cooling capacity of an air conditioner. One ton of cooling is the rate of heat transfer needed to freeze 2,000 lbs – or one ton – of water in 24 hours. This is equivalent to 12,000 Btu/hr.

Why is AC Tonnage Important?

In some cases, bigger size is better. But when it comes to air conditioners, in some cases less is more. You should never simply buy the biggest AC unit possible, or you could end up with an oversized system.

Where to find Trane AC Tonnage?

You should look for the last two numbers of the first numbers after a cluster of letters at the beginning of the model number. It will be a number divisible by 6 or 12, and represents the nominal BTU of the system in thousands. A ton of air conditioning equals 12,000 BTU, and 36 divided by 12 equals 3, so the data plate below indicates the system is 3 tons.

Trane is the only brand we are familiar with that occasionally lists a two-digit number for the thousands of BTU rating that is not divisible by 6 or 12—but close.

Here’s a rundown of the range you will encounter: 18 = 1.5 tons, 24 = 2 tons, 30 – 2.5 tons, 36 = 3 tons, 42 = 3.5 tons, 48 = 4 tons, and 60 = 5 tons. And this is another one that is 2.5 tons.

In case you are doubting whether you have found the right two numbers, you can double check it by checking for the RLA rating. Its located the same on the data plate. RLA is an acronym for Rated Load Amperage, and is what the maximum amperage should be when the condenser up and running. If you divide the RLA by 6 for older units and 5 or 6 for newer units, you should get a number that approximates the tonnage of the system.

Trane XR14 Air Conditioner Specs and Reviews – Efficient & Reliable

Posted By Mas Broto

Trane XR14 Central Air Conditioner System offer their customers a high-quality AC unit that are tailor made to provide the service you individually need. Whether you are trying to cool a two-bedroom condo, or a 6-bedroom home or a multiple room office, it is important to find the right AC Unit that will meet your needs the best. And Trane XR14 offer superior quality units for multiple applications.

Trane XR14 Air Conditioner System unit offers you up to a 16 SEER rating. This is one of the most efficient and reliable AC systems on the market in it’s category and price.

Trane XR14 Features

Efficient performance

The XR14 A/C system has a SEER rating of up to 16.00, making it an excellent choice for home comfort and for earning energy-efficiency tax credits.

Economical operation

The increased energy efficiency of this air conditioning system may substantially lower your home cooling costs.

Durable construction

Materials for all components in this central A/C unit are tested again and again for long-lasting performance and reliability.

Cleaner, healthier indoor air

Add Trane CleanEffects™ to your air conditioning system for advanced air filtration that removes more dust, pollen and other irritants from conditioned air for a cleaner, healthier, more comfortable home.

Trane XR14 Specifications

Every Trane air conditioner is packed with high-quality components. Each helps ensure that time after time, your unit will provide total comfort your family can rely on. The XR14 includes:

Climatuff® compressor
Spine Fin™ outdoor coil
Full-side louvered panels protect your investment
Baked-on powder paint resists rust
Unique DuraTuff™ non-corrosive basepan
Quick-Sess cabinet with full coil protection
Sound insulator (on select models)

Trane XR14 Models

XR14 air conditioner models (R-410A refrigerant)

Model	Cooling Capacity (Btuh)	Nominal Tons	Height (In.)	Width (In.)	Depth (In.)
4TTR4018	17,000	1.5	29	29	26
4TTR4024	23,600	2	29	29	26
4TTR4025	23,600	2	29	29	26
4TTR4030	28,400	2.5	29	33	30
4TTR4031	28,400	2.5	29	33	30
4TTR4036	34,000	3	33	33	30
4TTR4037	34,000	3	33	33	30
4TTR4042	40,500	3.5	29	37	34
4TTR4043	40,500	3.5	29	37	34
4TTR4048	47,000	4	29	37	34
4TTR4060	56,000	5	37	37	34

Trane XR14 Warranty

Trane XR14 Registered Limited Warranty Details

10 Year limited warranty on compressor
10 Year limited warranty on outdoor coil
10 Year limited warranty on internal functional parts
If the product is not registered within 60 days of installation Trane’s Base Limited Warranty terms will apply.
An option to purchase transferability of your Registered Limited Home System Warranty is available.
Optional Extended Warranties are available. Extended Warranties can pay for labor and other costs not covered by manufacturer’s limited warranty.
Ask for full warranty information at time of purchase. Warranties are for residential use only, some exclusions may apply.
Register within 60 days of installation to activate warranty. Residential use only. Some exclusions may apply.

Trane XR14 Reviews

The reputation of Trane has in this HVAC industry is unparalleled. From their products being made in America to the testing of their equipment in laboratories. Trane offer the XR14 Air Conditioner line as their budget option for residential hvac systems.

Trane is an established company that takes a lot of pride in their HVAC products. If I didn’t believe this was a good product that is going to last a long time in your home without giving you problems, I wouldn’t recomend it for you.

Remember, no matter who you have install your Trane XR14 system, please make sure they know how to measure and install the correct size system for your particular home. Pick the licensed contractor in your local area that will pull a city or county permit and has a good reputation online. When you do, you’ll have better peace of mind. Cheap prices don’t usually translate to quality installs.

Heat Pump Troubleshooting Chart

Posted By Mas Broto

Heat Pump is being popularly used in houses and other places to provide solution to heating and cooling the area. It is central air-conditioner which has heating solution as well. It heats the air inside the area by collecting heat from the air that is present outside the house. Caring for heat pump is similar to that of air-conditioner with some changes that are specific to heat pump. Heat Pump troubleshooting chart can help you in smoothly and efficiently using it.

This heat pump troubleshooting chart is going to help you in analysing what problem is there and how you can tackle that. This chart can be used for air conditioner as well.

Heat Pump doesn’t Turn On

This can be due to various reasons such as:

If the setting of thermostat is not correct. When used for heating purpose heat should be chosen and temperature needs to be higher than the room temperature. For cooling it should be set at cool, and the temperature should be lower than the room temperature. If the setting is correct and you still see some discrepancy call the technician.
See that the breaker is switched on, check the entire connections main and sub panels. It may be required to reset the breaker.
There could be some problem with the wiring. Check that there are no damaged wiring, if so replace them and contact the technician as soon as possible and turn off the main unit.

Heat Pump is Not Heating despite being On

Reasons due to which this can happen are:

If Indoor coil is dirty, clean it and if necessary contact the clean-up service
Filter has to be cleaned and checked every 30 days, if using reusable filter clean it regularly or else use disposable filter.
Indoor fan could be the reason. The drive belt of blower could be loose and slipping, get it tightened and clean the fan.
Leakage in suction reversing valves or discharge valves.
Non-condensable are present in the unit, get it checked by a technician.
Your refrigerant could be low. It happens because of leakage somewhere, get the unit checked.

Evaporator Coil has Frost On it

Reasons for this could be:

Filter is dirty, clean it regularly or use disposable filter.
Coil fins are bent. You can correct them using the fin comb.
Fan problem
If thermostat is not functioning properly then replace it.
Coil is dirty and needs cleaning.

Liquid leaking from Unit

Reasons for this can be:

Check the condensate hole and line and clean it if clogged.
Drain pan is clogged, get it cleaned.
Leakage of refrigerant, if so get the unit checked and repair the leakage.
Piping and valves in bad condition, ensure nothing is damaged or leaking.

This heat pump troubleshooting chart is going to help you out in checking whether there is any trouble in your heat pump unit and if so can you tackle it or you would need a technician for the same.

Trane Warranty Lookup

Posted By Mas Broto

Heater, air conditioners, furnaces and or humidifiers should all include their own warranties. In some cases there are going to be different coverage for varied parts of the models. The first place to search for details on your trane warranty lookup is your owner’s manuals. If you’ve lost those, usually you are able to find them online by searching the age model number of your Trane unit.

Trane used to run their warranty, but then they stopped around 2012 or 2013. They now use a third party warranty that is damn near worthless. In the end the company should take care of all issues (non maintenance related) for the 10 years and its that companies responsibility to deal with the 3rd party warranty company.

Trane Warranty Registration

By register the trane product units online helps to prevent a system from not being covered. It also allows the manufacturer to have a direct line of communication with you to inform you about purchasing an extended trane warranty that the dealer may not have let you know about.

For complete, detailed information on your specific products warranty coverage, please read below or visit Trane Warranty Registration page.

How to register and claim warranty for your Trane product?

Registering your trane products provides you any one of the most effective manufacturer’s limited warranties on parts offered. You will require the serial number, model number and installation date for every product getting registered.

You can register your trane warranty online by the link below: https://www.trane.com/residential/en/for-owners/warranty-and-registration.html

This registering of warranties online is becoming the standard in the HVAC industry.

How do I find out if my Trane units was under warranty?

In these modern times, you will find websites for all the different trane heat pump or air conditioner that you enter your serial number and it will give you trane warranty lookup details. You may also call a local distributor and they should be able to tell you.

How do I transfer ownership of a Trane product warranty?

You will need to contact trane customer service, and they will ask for the new homeowner’s information as well as a transfer fee.

Trane Warranty Covered & Terms

Warranty terms vary depending on which Trane® product you purchase, but here is an overview of what is covered:

Air conditioners compressor, outdoor coil, internal functional parts
Heat pumps compressor, outdoor coil, internal functional parts
Furnace heat exchanger, internal functional parts
Coils internal functional parts
All-in-one Systems heat exchanger (where applicable), compressor, coil, internal functional parts
Air Handlers internal functional parts
Air Cleaners internal functional parts (excludes filters)
Humidifiers internal functional parts
Controls and Thermostats internal functional parts

How to Find the Trane Tonnage from Model Number

Posted By Mas Broto

Finding the Trane Tonnage of your heating and air conditioning system is needed when you decide to replace your Trane AC unit. Error in doing AC size analyzing can result in oversized and/or undersized. This is bad because it will cause problems in the future. We will help you to find the size of your trane tonnage from model number unit.

Trane tonnage is used to determine the cooling capacity of your AC unit. In determining the capacity of heating and air conditioning system, the term btu (British Thermal Units) is used. One ton of cooling is equivalent to 12,000 Btu/hr. This means the rate of heat transfer needed to freeze 1 ton of water in 24 hours. With a simple understanding of BTU to tonnage then interpreting the trane tonnage from model numbers will be easy.

Trane uses model numbers incorporate the BTU equivalent into their unit model numbers, or reference the tonnage. They have model numbers that tell everything from the size of the unit to whether the system has had major upgrades.

Trane Model Number Location

The easiest way to look Trane tonnage model number is on the AC unit itself. Go to the condensing unit on the outside and look for the data plate stamped on the actual side of the compressor. Find the model number. Within this string of letters and numerals, you should find an even, two-digit number.

The capacity in tons of a Trane outdoor unit can be determined by dividing the 7th and 8th digit of the model number by 12. So if the model number is 4TTX4036A1000AA, take 36 and divide by 12, equaling 3 tons. Lets decode this trane serial number as the example above:

First letter: The model number starts with 4. This number represents the type of refrigerant the unit uses. 2 stands for R-22 and 4 stands for R410A.
Second letter. T stands for Trane.
The third letter represents the product type. T stands for split cooling.
The fourth letter equals the product family.
The fifth number is for unit’s Seasonal Energy Efficiency Ratio. A single number represents the SEER: 0 = 10, 1 = 11, 2 = 12, 3 = 13, 4 = 14, 5 = 15, 6 = 16, 7 = 17, 8 = 18, 9 = 19.
The six letter. Zero indicates the system’s connections are brazed or soldered.
The seven and eight number indicate tonnage. How many BTUs the unit produces in thousands. For example: 36 = 36,000 BTUs.
The nine letter represents the age. Any type of major modifications done to the system since it was originally manufactured explained here. Click here for more information on how to know the age of trane from serial number.
Number ten indicates the power supply voltage. 1 = 200-230/1/60 or 208-230/1/60, 3 = 200-230/3/60, 4 = 460/3/60.
The position eleven, twelve and thirteen. These numbers represent any secondary function.
Position fourteen stands for minor design modifications
The last letter is the unit part’s identifier code.