Healthy Pregnancy through HCG Analysis

Mar - 31 2015 | no comments | By

During pregnancy, a lot of changes happen inside a woman’s body. She may experience morning sickness, back pains, and fatigue, especially during the early stages of conception. Several hormonal shifts can also happen and the excretion of Human Chorionic Gonadotropin is noted. This type of hormone is produced in the placenta which ensures that proper bond between the fetus and the mother is established.

hcg diet dropsThe levels of HCG are recorded to ensure that the developing fetus is in proper condition. In order to monitor the expected changes, quantitative and qualitative tests are conducted. A quantitative test is done to analyze the amount of HCG hormones present in the body. If the result shows a lower level of HCG, the test is repeated after a given time frame. On the other hand, a qualitative test is performed in order to know whether the woman has indeed HCG compounds in her system. Urine tests are usually conducted and more accurate results are expected when the samples are collected early in the morning.

Human Chorionic Gonadotropin levels are related to the period of conception. Usually, during the 56th – 77th day of pregnancy, the HCG levels are at the highest. On the succeeding days, the levels will drop until there are no more left on the date of delivery.

High levels of Human Chorionic Gonadotropin beyond its peak period may indicate one of the following situations:

1. Multiple pregnancies.

This condition is characterized by the formation of two or more embryos inside the mother’s womb. This can be further classified into two types, the identical or monozygotic and the fraternal or the dizygotic.

When two different sperms fertilize two different eggs at the same time, fraternal multiple pregnancy happens. The chromosome profiles of the babies are distinct from each other because of a crossover that happens during the stage of meiosis. As a result, the twins may not look exactly like the other.

Unlike in fraternal cases, identical multiple pregnancies produce babies with similar and nearly identical genes. This occurs because when the fertilized egg undergoes cell division, two different embryos are formed.

2. Molar pregnancies.

This abnormality arises when instead of a developing embryo, a large mass of tissue is formed. The two types of this condition are called, “complete” and “partial”. In partial molar pregnancy, an embryo is implanted in the uterus but the tissues disable its proper growth. On the contrary, complete molar pregnancy shows no signs of a placenta and a developed embryo.

On the other hand, abnormal lower levels of Human Chorionic Gonadotropin may suggest the following cases:

1. Ectopic pregnancies.

Instead of being implanted in the uterus, the embryo is adhered on the outside area of the mother’s womb. This happens when the fertilized egg fails to reach the walls of the uterus and instead, settles in the fallopian tube. There are also recorded cases wherein the egg is implanted in the ovaries, cervix, or in the abdomen. Women who suffer from this condition must seek the doctor’s help immediately since internal bleeding may occur.

2. Miscarriages.

In most cases, this condition happens during the first and second trimesters of pregnancy. Miscarriage takes place when the fetus dies even before it reaches the correct date of delivery. Women who are 40 years old and above have higher risk of experiencing this type of pregnancy abnormality.

It is important to keep in mind that a single analysis of the HCG levels does not guarantee an accurate result. Moreover, remember that a higher or lower HCG level does not always mean an abnormal gestation. Wrong estimate of the date of delivery may also be a factor since the period of conception is an important factor in assessing the levels of HCG.

Author Bio:

A quantitative test is done to analyze the amount of HCG hormones present in the body. If the result shows a lower level of HCG, the test is repeated after a given time frame. For such useful details visit URL.

Challenge Coins: The Materials They Are Made From

Mar - 24 2015 | 1 comment | By

Challenge coins are coins that bear an organization’s emblem or logo. These coins were first used in the Military during the First World War. Such coins were given to military members as a token of appreciation for their work or contribution. However, the use of these coins is not limited to military personnel nowadays. Private and public organizations now widely use these, mainly to represent the spirit and core value of their team. Members of any public and private organization carry them to prove their allegiance to the organization, anytime and anywhere. They are also using such coins in promotional or marketing campaigns to win over customers. Challenge coins typically have impressive designs. Anyone who receives a coin would be more aware of the organization that gave it.

Challenge coinsChallenge coins can be designed according to the organization’s liking. The designers of these coins create designs that best represent the need and the spirit of the organization. Usually, the organizations take the liberty of choosing the materials used in making the coins from the base material to the enamel filling. The materials determine the challenge coins’ durability and overall aesthetics. Different materials are used during different stages of the process of making these coins.

During the initial stage, or the designing stage, design ideas coming from the organization are the first and most important materials used to create the coins. Such ideas can be in any form—from written descriptions to sketches. Another important material is the graphics software that the designer will use, such as CorelDraw or Adobe Illustrator.

In the molding stage, the sculptor uses an engraver, which transfers the coin design from the final mold to the obverse die (for the front of the coin) and reverse die (for the back of the coin).

The sculptor will then use a hammer and anvil to engrave the obverse and reverse dies to a planchet (a thin and blank piece of metal), thus engraving the designs to the challenge coin.

Copper, zinc, iron alloy, and brass are the metals used as base materials during the molding process. Coin makers recognize brass as the best base material as it makes durable, lightweight, and long-lasting coins.

In the plating process, the materials do not only provide whatever color metal is preferred, but also the overall design and texture of the coin. Sculptors use different materials to accentuate the subtle designs and engravings to achieve the best appearance possible. There are two options in coin plating: antique finish and shiny finish. In each category are different metal choices.

1.Antique Finish

Antique finish gives coins an old-looking texture. Within this category are three metal choices: antique copper, antique silver, and antique brass.

Antique brass provides standard finish and is the cheapest also.

Antique silver provides common finish and a little more expensive than antique brass.

Antique gold provides a unique feel and is the most expensive among the three.

2.Shiny Finish

Coins with a shiny finish are brighter and have a sleeker feel. Metal choices within this category are shiny gold, shiny silver/nickel, and shiny black nickel.

Shiny gold and shiny silver/nickel provides a common finish, but the former is more expensive than the latter.

Black nickel, on the other hand, provides a rare finish and expensive feel. Few companies manufacture coins with shiny black nickel finish. Thus, they are the most expensive among all finishes.

In the process called enamel filling, the coin sculptor will use colored enamel fillings to fill the recessed areas of the coin. There are three types of enamel filling that can be used to fill the recessed areas of the coin: synthetic, hard, and soft enamel. What distinguishes the three is the level of quality and aesthetics that each of them provides.

Synthetic enamel is the best in making challenge coins with flashy and vivid colors. Colors it provides are even with the metal ridges, giving it a smooth feel.

Soft enamel, on the other hand, has endless color choices. It fills the recessed areas of the coin and retains the raised metal surfaces that separate the enamel colors. It is the most popular enamel filling and the most widely used.

Lastly, hard enamel, the most expensive enamel, has limited color options and only fills coins made from copper. Hard enamel requires copper instead of brass because it has higher melting temperature. Hard enamel can only melt at the temperature of 1,470 Fahrenheit and above.

Making Boring Websites Shine With Proper SEO

Feb - 18 2015 | no comments | By

There are a lot of businesses that are less than stellar when it comes to information. You may find that your niche has a lot of potential, but the topic may be less than exciting. Whether it’s highly technical, or it’s something that has a very small fan base in a very isolated area, you will find that your seo reach will be hard to come by. It’s not impossible, but it needs help and something that you will not be able to do on your own. Let’s say for instance, you were making a site about chess strategies. This may not appeal to a global community, but you may have a lot of people interested in the game, buying pieces, and so much more. When you start to factor in the global potential, you may find that this is a good niche for you. Of course, this is only an example, as there are other things that you will need to factor in to your personal choice.

www.nyseoexplode.comIf you want to make boring websites shine, you will need to focus on the good aspects of seo, and it’s not just what links you get. You’ll need to factor in the content and design of your page. First and foremost, make sure that you hire a professional designer or seek out a good premium template for your page. If you do not focus on the design, layout, and content of your site, you will not be able to make gains, plain and simple. Even if your target audience doesn’t necessarily gauge these things, search engine results will. To focus on the end user, you need to also placate the search engines when you are not aligned with what they recommend for greater market share. This will take time.

Another thing that you need to do is hire someone to do the content management. The management of your content needs to be done with a professional flair, especially when it comes to making boring topics exciting. Boredom reigns in a lot of topics and if you’re trying to gain market share in these arenas you will need to have someone work on things in a very positive manner. That takes time, there’s no two ways about it. You could try to do it on your own or you could let someone else chase things for you. When you have someone professional on your side, you will be able to dictate far more traffic, even from niches that you may not think about at first glance.

Outside of the above tips, you need to look into working on putting all the pieces together. Internet marketing is not something that you can do alone. You need a helping hand, and you need to position your different pieces for the biggest gains possible. Internet marketing is not just one isolated area of the world of seo. You will not be able to make gains, for instance, if you’re just putting your links on social media pages. If you want to gain market share you need to isolate more than one area, and focus on building things over time. If you want more than a flash in the pan of interest, it will take work and time.

Admittedly, there are some topics and genre that are completely difficult to gain with, but it’s not impossible. The keys to this is more than just working on affiliate marketing, or anything like that. Focus on getting help with the topic and you will be able to rank #1 in time. It takes time, there’s no other two ways about defining this. If your topic is boring then you need help, or you will find yourself struggling to gain leverage and nuance within search engines.