Sometimes you need to reset your Bryant air conditioner, especially after a power outage. When the power comes back on, the sudden increase in voltage may have caused your circuit breaker to shut off your air conditioner. This is a safety measure to prevent fires and explosions.
The best thing about resetting your air conditioning is how easy it is. Just press the reset button, and you’re done!
But if you have a Bryant air conditioner and can’t find the reset button, this might be a little confusing. You may have looked all over the unit and double-checked the manual to see where that reset button was, but you still couldn’t find it. This is because most Bryant air conditioners don’t come with a button to reset the unit.
How do I reset my Bryant air conditioner?
If your Bryant air conditioner stops working, you might be able to fix it with a simple reset. Bryant air conditioners, unlike some other brands, don’t have a simple reset button on the unit itself. You will need to reset a circuit breaker in your home instead.
Step 1: Find the circuit breaker box. Most of the time, you can find these in your basement, garage, or laundry room.
Step 2: Open the box and find the circuit breaker for your Bryant air conditioner.
Step 3: Turn the appropriate circuit breaker to “Off” and wait about 1 minute.
Step 4: To turn the unit back on, flip the circuit breaker back to the “On” position.
Make sure the device is set to the temperature you want, and wait for it to cool the air to make sure it’s working.
Why is my Bryant air conditioner not working?
Don’t try to reset your AC unit again and again if it’s still not working or if you notice that the circuit breaker keeps tripping. This could be a sign of a bigger problem.
Sometimes the problem is caused by a connection that isn’t tight or a wire that isn’t covered. If you try to reset the Bryant air conditioner while this is going on, you could start a fire. In these situations, calling a professional HVAC technician is the smartest thing to do.
Some other potential causes include:
- Dirty and clogged pan
When you turn on the air conditioner, do the vents smell like mold? The smell could be caused by a clogged drain in the condensate pan, which collects water that drips off the condenser coil. To fix the problem, you will need to clear out the drain and clean it with a bleach solution that has been diluted.
- Fan motor issues
If there’s a burning smell coming from the vents, the blower motor might not be working right. The bearings in the motor might just need more oil. You should have this looked at soon to make sure that a simple fix doesn’t turn into a more expensive one.
- Compressor failure
The refrigerant is held in the condenser coils as it changes from a gas to a liquid solution. The coils can freeze up and stop working, or they can leak refrigerant out of the air conditioner. Condenser coils can be changed, but the cost of doing so is pretty high.
Final Words
Resetting a Bryant air conditioner is normal, but if you do it too often, it could mean there’s a bigger problem. And resetting the unit all the time could make the problem even worse. Still, if you have to reset your AC unit all the time, you should have a professional check it out. They can figure out what’s wrong and find the fastest and least expensive way to fix it.
